Jiangsu, China
Business Type:
Main Products:
Number of Employees:
Year of Establishment:
Plant Area:
6729.3 square meters
Management System Certification:
ISO 9001, ISO 9000
OEM/ODM Service

Copper Drawing Machine, Copper Fine Wire Drawing Machine, Copper Fine Wire Drawing Machine with Annealer manufacturer / supplier in China, offering Hxe-22dwt Copper Fine Wire Drawing Machine with Annealer, Hxe-24dw Aluminium Wire Drawing Machine Price; Hot Sale, Good Quality 24dw Automatic Aluminium Wire Drawing Machine 1 and so on.

Gold Member Since 2015
Audited Supplier

Hxe-22dwt Copper Fine Wire Drawing Machine with Annealer

Get Latest Price
Min. Order: 1 Piece
Port: Shanghai, China
Production Capacity: 30sets Per Mouth
Payment Terms: T/T
Type: Horizontal Metal Drawing Machine
Usage: Wire, Prestressed Steel Wire, Standard Parts
Metal Material: Copper
Outlet Diameter: 0.2-0.8
Max.Inlet Wire Dia.: 1.2-1.8
Dies: 22

You Might Also Like


Basic Info

Model NO.: HXE-22DWT
Warranty: 1 Year
Motor: 22kw+5.5kw
Annealer Type: DC Three Section Annealing
Transmission: Timing Belts+Triangle Belts+Flat Belts
Capstan: Tungsten Carbide Coating
Brake: 20kg-M Pneumatic Brake
Traversing: 110kw Reduce Motor
Oxidation Protection Type: Protected by Steam, Capacity 8kg/Hour
Take up Type: Shaft Type
HS Code: 8463102000

Product Description

HXE-22DWCopper fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 1.2mm-1.8mm to 0.2mm-0.8mm.
Hxe-22dwt Copper Fine Wire Drawing Machine with Annealer


1.Pay-off stands1 set
2.HXE-22DWT Main drawing machine1 set
3.Electrical cabinet1 set
4.Steam generator1 set
5.Lubrication tank and Pump1 set
6.Bobbin loading&unloading trolley1 set
7.Spare part for one year1 set

II.Main Technical parameters 
1.Usage: Copper wire drawing and annealing 

2.Inlet diameter: 1.2mm-1.8mm  

3.Outlet diameter: 0.2mm-0.8mm

4.Max. mechanical speed: 2000m/min

5.Dies: 22 dies; Die dimension: Ф25mm*8-10mmT

6.Slip ratio: 15%, Finished capstan slip ratio: 8% 

7.Main motor: AC 3 Phase 22KW, Inverter control 

8.Take up motor: AC 3 Phase 5.5KW, Inverter control 

9.Power transmission: Timing belts+Triangle belts+Flat belts

10.Take up capacity: 500kg for diameter 630mm iron spool 

11.Spool size: Diameter 630mm

12.Take up type: Shaft type 

13.Capstans: Tungsten carbide coating 

14.Capstan lubrication: Water pipe spray 

15.Traversing: 110KW reduce motor 

16.Brake20KG-M Pneumatic brake 

17.Air pressure: 4-6kg/cm2 

18.Annealing pulley: Diameter 120mm 

19.Annealing volt: DC60VAnnealing current: DC800A Annealing motor power: 48KVA 

20.Annealer type: DC Three section annealing, with aluminium door to open and close, with three brass annealing capstans and nickle rings to achieve wire annealing.

21.DC contact type/triangular annealing system/fully automatic follow up control (PLC control and Touch screen operation)

22.Oxidation protection typeProtected by steam, capacity 8kg/hour, 

23.With Air blow system to blow water on wire surface (Air flow during annealing), Compressed air is needed (Buyer self prepare compressed air source). Compressed air 0.4-0.6Mpa, capacity 50L/min for one set machine.

24.Safety cover for spooler: Made of stainless steel, with window to observe

25.Tension control: Swing arms, Air pressure auto adjust.

26.Annealing cooling water recycle system: One 3 cubic meters water tank(With block to make the tank into two parts,one for output and one for input ), Heat exchanger, Pump, 2.2KW Pump motor, Watch, Small pipes. Capacity 100L/min for one set, Pressure 0.2-0.3Mpa. Anti-oxidation 0.5%-1% mixed with water (Buyer self prepare).

27.Drawing lubrication oil recycle system: One 3 cubic meters tank(With block to make the tank into two parts,one for output and one for input ), Heat exchanger, Pump, 2.2KW Pump motor, Watch, Small pipes. Drawing oil 2%-3% mixed with water (Confirm with oil supplier), capacity 50L/min for one set, Pressure 0.4-0.5Mpa (Buyer self prepare)

28.Electrical control system: With Siemens Inverters, PLC, Touching screen to control drawing speed and annealer. When set the parameters in advance, machine will auto increase speed, annealer will auto increase voltage and current with speed increase. When reach the setting meter length, machine will auto stop, and Alarm light will auto on and give alarm sound.

29.Annealer part is made of Aluminium, with aluminium door to open and close, with three brass annealing capstans and nickle rings to achieve wire annealing.

30.Machine dimension(L*W*H): Under confirm, Machine total weight: Under confirm

31.Power source: 380V, 50Hz, Machine color: as per buyer`s request

III.HXE-22DWT Main drawing machine 

1.Material: Q235A 


2-1.Frame is weld by steel plate, sand blasting and anneal to eliminate the inner stress. 

2-2.Further processed by exactitude milling machine. 

3.Wire inlet location: Located on the left of machine, 6 bores. 

4.AxesMaterial:45# steel. Precision: HRC25/27. Eliminate inner stress, improve the rigidity. 

5.Capstan: Tungsten carbide coating, 4pcs. Loading&unloading the capstans, fixed tightly by cone model, capstan could be displaced according to the die location, avoid break the precision of axes. 

6.Die Seat 

6-1.The 1st and 22nd dies are independent. The 2nd to 21st die are founded by milled iron, small, increase operating room. 

6-2.Die seat could be displaced according to the location of capstan. 


7-1.Over the capstan and dies, has floating water pipe, won't impact the wire pointing. 

7-2.The 1st and 22nd dies are lubricated separately. 

8.Bobbin size: 630mm

9.Bobbin speed control 

9-1.BAir pressure, auto revising the spooler tension automatically.

9-2.Regulating the tension according to the different sizes of outlet diameter.

9-3.Each machine will have one weight balance device as back up.

10.Traversing unit: 

10-1.110KW reduce motor  

10-2.The bearing is slippery, high rigidly and fray slowly. 


Alice Du

Send your message to this supplier

avatar Mr. Kevin Gu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now