Hxe-24dt Fine Wire Drawing Machine with Continous Annealer

HXE-24DT Fine Wire Drawing Machine with Continous annealer

Heng-xiemachinery technology Ltd was established in 2005, specializing in cable series equipments. 
Located at Suzhou city which is near Shanghai, Hengxie enjoys convenient transportation 
and nice environment.
Our company's main products are as follows: Copper Rod Breakdown Machine with 
Annealer, Medium Copper Wire Drawing Machine with Annealer, Fine Wire Drawing Machine
 with Annealer,Annealing and Tinning machine, Medium Wire Drawing Machine with Double Spooler
 etc. y
Our cable equipments have won its reputation both on domestic and overseas markets by its high 
quality, easy operate, less maintain and high productivity. More than 90% cable company are using
 our company's equipments including many listed company in Suzhou city. 
Our oversea market include India, Brazil, Egypt,Malaysia,Korea,Vietnam,Syria,Kennya 
Argentina, South Africa etc

I. Main Technical parameters
1.Usage single bare copper wire drawing and annealing
2.Inlet size 0.5mm-1.0mm
3.Outlet size 0.07mm-0.25mm
4.Machine speed/max 2000m/min
5.Die number 24, Dies size 25mm×8-10mmT
6.Wire drawing mode standing-mode and 4axes
7.Drive: by dual inverters control, Brand Inovance, Chinese famous brand.
8.Main motor 11KW AC 3 phase motor, Spooler motor 3.7KW AC 3 phase motor,
9.Annealing voltage DC50V/max
10.Annealing current DC300A/max
11.Annealing power 16KVA
12.Annealing method D.C three-section annealer
13.Quantity of steam 8kg/h
14.Capacity of compressed air 0.4-0.6Mpa,15L/min
15.Demand Water quantity for annealing and coolant 150L/min
16.Machine frame welded by steel plate
17.Transmission By flat straps
18.Capstan ceramic coated
19.Lubricating system Spray
20.Bobbin size 300mm, loading capacity :50kg/max (customize)
21.Bobbin loading &unloading type shaft type
22.Traversing unit 110W synchro motor, width: 270mm/max
23.Bobbin controlling weight balance & tension control
24.Brake 20KG-M magnetic brake
25.Operation panel &control cabinet 1000×800×1800mm
26.Machine dimension 2100mm*1600mm*1700mm
27.Machine weight 3000KG
II. Main components
1.Drawing machine & annealing machine  1 set
2.General electrical control cabinet  1 set
3.Steam generator  1 set
4.Lubrication tank and pump  1 set
5.Spares and accessories
III. Structure
1.Main machine structure
1-1.Material Q235
1-2.Structure The machine frame is welded by steel plate, sand blasting and anneal to eliminate
the inner stress, then further processed by exactitude milling machine
2.Wire inlet
Inlet location Located on the left of machine, 6 bores.
3.Axes
3-1.Materials 45# steel
3-2.Precision HRC25-27,to eliminate inner stress, to improve the rigidity.
4.Transmission by flat belts
5.Capstan
5-1.ceramic coating
5-2.Loading &unloading the capstans, fixed tightly by cone model, the capstan could be displaced according to the Die location. Loading and unloading easily, to avoid break the precision of axes
6.Die Seat
6-1.The first Die is independent.
6-2.The 2nd -19th die is founded by milled iron, it is small, increase the room.
6-3.Die seat could be displaced according to the location of capstan.
7.Lubricating
7-1.Over the capstan and dies, sett floating water pipe, so it won't impact the wire pointing
7-2.The 1st and 20th die, it is lubricated separately.
8.Bobbin size customize
9.Spooler speed control
9-1.By swing arm, revising the spooler automatically
9-.Regulating the tension according to the different sizes of outlet diameter.
10.Traversing unit
10-1.110W synchro motor, stable and react fast.
10-2.The bearing is slippery, high rigidly and fray slowly
11.Bobbin loading and unloading
11-1.Single shaft type. With trolley and slope board to load and unload the bobbin.
11-2.The safe cover is shut up, with acrylic window to look over the spooler and traversing.
11-3.With one wrench to load and unload the bobbin
12.Motor
12-1.Main motor 15HP(11KW)AC motor +inverter control.
12-2.spooler motor 5HP(3.7KW) AC motor +inverter control
13.Electric control
13-1.Electric components:Made in Germany and Japan
13-2.Power source: customize
13-3.Indication
Power switch
Power indicate
Digital line speedometer, meter counter, annealing voltage and annealing voltage
Breaking line control and malfunction indicator
Emergency stop button Foot switch
Over loading protection, controlling line protection and
Annealing /Not annealing
Manual
14.Spare part
14-1.The tool for loading &unloading capstan 1
14-2.Wire laying wheel 2
14-3.Wire distribute wheel 1
14-4.Fuse 3
14-5.Groundwork bolt 4
14-6.Porcelain eye 3
14-7.Wrench 1
14-8.Mate weight 1
14-9.Carbon brush 12
14-10.Nickle strap 160mm×3 162.5mm×1