HXE-13DL Copper Rod Breakdown Machine with Annealer
Main technical parameter
HXE-400/13DL Copper rod breakdown machine with annealing
HXE-400/13DL Copper rod breakdown machine is used to draw and anneal single bare copper wire from 8mm to 1.2mm-1.6mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control
can be matched with each other.
I.Compositions of equipment
|1.Pay-off shelf ||1|
|2.HXE-400/13DL Main drawing machine||1|
|3.HXE-TH250 Annealing machine||1|
|4.HXE-180 Tension controller||1|
|5.HXE-SX630 Elephant Nose ||1|
|6.HXE-WS630 Single spooler||1|
|9.User manual, Inverter instruction, Installation layout|| |
|10.Spare parts|| |
1.Guide roller type which is attached ground root.
2.This unit is composed of a stand and a guide roller.
3.It is adopted advanced structure which has a single pole with a rotation arm.
4.This pay-off stand can load 2 Copper Rod coils at the same time to achieve to pay off wires continuously.
5.Height of pay-off shelf 5000mm
6.The maximum diameter of inlet coil 2000mm
7.Guide wheel diameter 590mm
8.Quantity of guider 3 pcs
9.Straightening function for the inlet rod
III.HXE-13DL Main drawing machine
- Gearbox is welded by HT200 cast iron accurately as a whole piece. It has many excellent features,
- for instance higher rigidity, well sealing performance. Also it will not leak water and oil and can reduce vibration efficiently.
- The gearbox is treated with one-off orientational processing to make sure processing accuracy.
2.In the gear box, material of bevel gears is 20CrMnTi and it is treated with cemented quenching.
3.The surface of drawing capstan is in a double-cone shape to enhance its using life greatly.
4.The drawing box has double covers to seal. Covers are made of stainless steel. The outer cover has six parts and
- inner cover has four parts and can be open and closed by hand.
5.The bearings are HRB, China best brand
|1.Inlet ||8mm |
|3.Diameter of capstans ||400mm |
|6.Quantity of capstan ||13|
|9.Main motor ||AC 200KW|
|11.Noises of machine ||≤85 db |
|12.Protection cover ||Installed |
|13.Lubrication system||1 set|
IV.HXE-TH250 Annealing machine
A vertical annealing machine by D.C 3 section, steam protecting Including electric conduction system, anti-oxidant protection system,
coolant system, and electric system ,etc.
1.Annealing size 1.2mm-1.6mm
2.Annealing speed 1000mpm
3.Annealing voltage 50V/Max. Annealing current 1500A/Max.
5.Annealing volume 75KVA
6.Power source customized
7.Cooling water capacity 300L/min
8.Steam generator power 9KW
9.Steam quantity 12kg/h
V.Operation panel (Touch screen&PLC)
9.Operation panel and electric cabinet are build within same electrical system.
1.Electric cabinet (Control cabinet)
2.Annealing cabinet&Annealing transformer
VII. HXE-180 Tension Controller
|1.Purpose||When start, stop, bobbin changing, use it as compensation of line speed micro changing|
|2.Type||Tensile strength is adjusted by pneumatic|
|3.Air pressure||Adjustable within 0.3~0.6Mpa|
|4.Accumulating length||ITO standard: over 7 M|
|5.Guide roller material||AL and ceramic coating treatment|